Bersa magazines

Stick your left thumb on the underside of the front part of the slide stop. When you rest it on the front side, it makes it want to go up in the rear. It works as a see saw. I did the same thing.

I would also remove the magazine safety. It did my Bersa magazines wonders.

But your point is valid, why hop to another platform before you really know it.

I say:

Keep your 1911, you’ll regret getting rid of it IMHO.
Save up for A. Reloading gear and B. a HiPower.

I like my 1911 and Bersa magazine and don’t think I’d want to part with either.

alsidfdasdg29
-

AK-47

I’ve got an SA M7, and I was looking on the AK-47 site recently, for the replacement stock SCREWS, and I noticed they have a "new style" or maybe it was "improved style", but this "improved" style was stated to ONLY be used with "virgin stocks".
Not to mention that I THINK I remember they were OUT OF STOCK on the original stock screws. What is different about these "improved" screws, and how do they differ from the originals, that I have in my gun?
I am not so sure my local hardware stores have these same sized screws. I mean, they have screws of this nature, but the heads are different sizes/etc, and I would just prefer to buy the true stock screws from an ak-47 supplier. (not sure who else would have them, other than K-VAR????)

alsidfdasdg81

Uncle Mikes Holsters

Recently I have taken the time to purchase all Galco carry pieces for my Colt 1911 carry gun Holsters and also more leather Holster for the High Power….let me tell you, there is a WORLD of difference between Fobus/Uncle Mikes type stuff and Galco/Mitch Rosen/SafariLand type stuff.

You absolutely cannot afford to buy cheap leather/kydex for a carry piece any more than you can afford to put a Simmons scope and 12 dollar weaver mounts on a Steyr PSG….and expect decent results anyhow.

I’ve had 2 and love them. I had one for my Sigma and it didn’t hold it well but it did hold it. My Uncle Mikes Holsters Glock 22 locks into mine and will stay in through just about cowboy holster. Only problem with them is that they can be two hard to get off my Tactical holster. Not really that big of a deal.

I got news, don’t like cheap stuff, fine, don’t buy it. That Video is BS, because those two are obviously trying to break that holster. I suspect I could do somehting similar with most any brand of paddle concealment holster out there. Paddle holsters are about convenience, not ultimate security, if you want 100% security, buy an UM pro-3. Personally, I own a Fobus for almost every pistol holster I own, and just placed an order for 3 more. I have been Using Fobus since they came out, weekley, for IPSC and 3gun competitions, and have abused the heck out of them with ZERO problems. About a year ago, at a 3gun match, I fell during a stage. I was wearing a Fobus C21 1911 paddle Uncle Mikes Holster. I fell hard, directly on the Handgun Holster, with the rear sight of my pistol digging into a barricade. The concealment holster was strong enough that it ripped my jeans and flipped me over as I fell without breaking.

FObus haters are Just like Wolf Haters, they cannot be reasoned with or dissuaded. They feel if you didn’t spend as much money as possible or at least much as they did, then you are inferior as a human being. It’s your money, spend it however you like.

alsidfdasdg12
-

holsters

I realize this is not the accessories or holster forum but it is the Glock Magazines forum

I need a comfortable IWB Blackhawk Holster for my G19.

What do you guys recommend?

User Info IM User Email User Reply Quote Report

After a lot of money spent and a pile of holsters in my closet, I’m thrilled to say that I finally found a minimalist IWB Blackhawk Holster which does the job exceptionally well, feels like I’m not even wearing a Handgun Holsters, costs only $25 and is a stocking item ready to ship. What is it? High Noon Bare Asset. I’m getting them for all my carry guns now.

I ‘m portly and need that to be kept in mind.

alsidfdasdg01

Handgun Holsters

I quickly discovered that although the Fobus was great for that purpose, it was useless for concealed carry. So, I used it during the commute and switched to a Blade-Tech paddle holster before and after the commute. Worked great for it’s intended purpose and I liked it. Now that I don’t have that long commute, I just use the Handgun Holsters and position it a little further back around the hip in the car and slip it back forward for walking around.

Pardon me while I yawn; then see my remarks above regarding gun Holsters grabbers. Anyone who carries exposed, and isn’t wearing a proper uniform duty-type concealment holster, is ASKING to have their piece snatched.

Concealed carry is much more than techniques and gear; it is very much a state of mind as well.

Not dissing you personally, Aimless; but I have heard this pap about how easy a Fobus is to break repeated so often it is getting tiresome. I’m not disputing the fact; but those "instructors" who belabor the point are MISSING the point: which is, the Fobus is intended for concealed carry. IOW, nobody ahould know you even have a gun until you’re ready to show it to them…

his sucks; I have the EXACT Fobus Holster they denoted as being unsafe. I bought it about 2 months ago because I wanted a holster for my G19 with my TLR-1 mounted. I don’t use it for a daily carry holster, I only break it out once in a blue moon if my wife and I go for a late night walk. If I am not using the TLR, I prefer my Galco Holsters Matrix Belt Slide in the composite Uncle Mikes Holster arena - it just seems a bit nice than the Fobus to me.

I’ll probably keep mine as it is seldom used. I will, however, not be taking it’s possible safety issues for ankle holster.

alsidfdasdg14
-

Glock 17 magazines

MO ,Just more complexity to potentialy cause problems,loose pins etc.

Besides,how could Glock 17 magazines do this without closing off the backstrap channel?Everyone knows that must remain open in order for a Glock to function properly!

If glock wants to follow the lead of other manufacturers, whose current designs more than likely will not even be on the market in ten years ,I think it would be a mistake!

If you cannot adjust to the Glock 17 magazine ergos the way they are ,you have lots of other choices.

alsidfdasdg38

trijicon

Alright….Jason from BigDawg Tactical hooked me up with this rig and it arrived today. I immediately took it to the range for some testin’.

First off I’ve owned TA31’s, TA11’s, Trujicon Compact ACOG’s, Aimpoints, EoTechs, and a few variable scopes in between. I recently decided to ‘dumb down’ my AR’s to make them SHTF ready, rugged, and obnoxiously easy to use. Flip the safety to "fire" and go. Given the TA33R8’s BDC feature, BAC feature, chevron reticule, and overall lightweight construction, THIS is the only magnified optic for me! It’s like a TA31 hooked up with a TA50 one wild saucy night and conceived an illegitimate child!

alsidfdasdg62
-

Uncle Mikes Holsters

Recently I have taken the time to purchase all Galco carry pieces for my Colt 1911 carry gun Holsters and also more leather Holster for the High Power….let me tell you, there is a WORLD of difference between Fobus/Uncle Mikes type stuff and Galco/Mitch Rosen/SafariLand type stuff.

You absolutely cannot afford to buy cheap leather/kydex for a carry piece any more than you can afford to put a Simmons scope and 12 dollar weaver mounts on a Steyr PSG….and expect decent results anyhow.

I’ve had 2 and love them. I had one for my Sigma and it didn’t hold it well but it did hold it. My Uncle Mikes Holsters Glock 22 locks into mine and will stay in through just about cowboy holster. Only problem with them is that they can be two hard to get off my Tactical holster. Not really that big of a deal.

I got news, don’t like cheap stuff, fine, don’t buy it. That Video is BS, because those two are obviously trying to break that holster. I suspect I could do somehting similar with most any brand of paddle concealment holster out there. Paddle holsters are about convenience, not ultimate security, if you want 100% security, buy an UM pro-3. Personally, I own a Fobus for almost every pistol holster I own, and just placed an order for 3 more. I have been Using Fobus since they came out, weekley, for IPSC and 3gun competitions, and have abused the heck out of them with ZERO problems. About a year ago, at a 3gun match, I fell during a stage. I was wearing a Fobus C21 1911 paddle Uncle Mikes Holster. I fell hard, directly on the Handgun Holster, with the rear sight of my pistol digging into a barricade. The concealment holster was strong enough that it ripped my jeans and flipped me over as I fell without breaking.

FObus haters are Just like Wolf Haters, they cannot be reasoned with or dissuaded. They feel if you didn’t spend as much money as possible or at least much as they did, then you are inferior as a human being. It’s your money, spend it however you like.

alsidfdasdg12

CZ 75 magazines

A friend bought two boxes of WWB 9mm FMJ for me since I was broke and we went to the range. The CZ 75 magazines didn’t hiccup once. His PA-63 (9mm Makarov) was… interesting. The recoil drives the thing right into the web of your hand. Shoot it often enough and I can see some chafing occurring.

As for accuracy, I seemed to consistently hit about six inches low and to the left at 15 yards, though occasionally I was spot on. I think most of that was me and not the pistol though; my groupings were more like shotgun patterns. I am NOT at all in practice with handguns of any category. Fortunately, I’ve always been able to hit what I aim for (even drew my dad’s .357 revolver, cocked it, and put a round through a hog’s head at ten yards all in one motion. Without aiming.), and when I begin ranger training we’re going to spend a lot of time at the range with our handguns.

Overall, I’m pleased with my CZ 75 magazine. My only complaint is that the beavertail pattern on the plastic grip plates chafes my hand; I either need to toughen up my hands or get hard rubber grip plates. I don’t like the Hogue wrap-around grip.

alsidfdasdg36
-

Sturm Ruger names 2 new members to board
SOUTHPORT, Conn. — Gun maker Sturm, Ruger & Co. Inc. said Tuesday it named executives at hockey equipment maker Bauer and manufacturer Terex to its board. Sturm Ruger directors voted to increase the board to nine members, then appointed Amir P.

Vicious: Taser terror in Sydney hotel hold-up
CRIME scene … Police investigate an armed robbery at the Mantra Apartments in Chatswood. Picture: Bill Hearne Source: TWO thugs have terrorised staff at a Sydney hotel with Taser-style weapons during a brutal armed robbery that left one staff member in

‘Taser’ gun used in hotel hold-up (ABC)
Police are appealing for witnesses to an armed robbery in Sydney’s north last night.Officers say two men went into a Chatswood hotel just after 11pm AEDT, jumped over a counter and demanded money.The pair threatened staff with a taser-style weapon and

Sturm Ruger names 2 new members to board
Extract not available.

Sturm Ruger names 2 new members to board
Extract not available.

Sturm, Ruger & Co Names Two New Directors (RGR)
1/5/2010- Sturm, Ruger & Co. (NYSE: RGR | Quote | Chart | News | PowerRating) said it named executives at Bauer and Terex to its board of directors. The board voted to increase the amount of members to nine and then announced it appointed Amir P.

Erase Bad Credit Legally - Sponsored Link
Ad - Get A 700+ Credit Score Free Consultation. Sign up Online!

Taser inquiry report held off until spring
The Braidwood inquiry report dealing with the fatal police incident involving a Polish immigrant at Vancouver’s airport two years ago won’t be sent to the attorney general until April or May, officials confirmed Tuesday.

Gun Lobby’s Radical Agenda Fails, Again: Attempts to Force Loaded Guns on College Campuses Hits Wall of Opposition in 2009
WASHINGTON, Jan. 5 Bills Fail In Michigan and 11 Other States in 2009. Colorado State University Bans Guns On Campus In December; Momentum Builds To Protect Universities and Student Safety From Being Hijacked By Gun Lobby WASHINGTON, Jan. 5

Sturm Ruger names 2 new members to board
Extract not available.

AR-15 Accessories

I’m completely and absolutely new to the AR-15 model rifle, and I only own a German K98k.

I’m looking into getting once of these magnificent firearms, but I have no idea as to where to start, can you help a clueless newbie?

I’m trying to get one before the price goes up anymore that they already have, but I’m not looking to spend a ton.

thanks in advance.

That being said, I have a midlength gas system on my 6.8 AR15 accessories SPR.

alsidfdasdg53
-

Pilgrim Medicine

Eliminating Cold Medicine

Trusty Dentist

Lipo-Etching

Barefoot and Panty-Scanned

Fred Reed - on the latest sekurity circus response to the latest cheap attempt at terrorism. The terrorists continue to win, but not because of anything they’ve done. They’re winning because of the knee-jerk responses of the US government. [militant]

Eugenics Past and Present

Spooky Skulls

Eotech

LaRue just came out with a new LT670 mount, but it’s designed for the older 512 Eotech, (and now getting obsolete fast) The LaRue 670 mount will not work with the newer and higher 517 Eotechs. (How’s that product release for timing!)

alsidfdasdg69
-

Eotech

Bluedog,

I appreciate you taking the time to post that. Now I know for sure the 3 components will not fit together on a 6920.

Mind you….."DEBORAH" and "JOHN" OVER THERE AT EOTECH CLAIMED THIS WOULD WORK.

But, I was on the phone with her and was suspicious of the validity of what I was hearing because she didn’t even know what the 517 looked like. (I had to explain to her that unlike the 512, the 517 was recessed to fit over an M4 handguard) When she had to relay my question to some guy named "John" in the background who never got on the phone, but told her "Yea, it’ll fit", I didn’t take it seriously! I WASN’T BORN YESTERDAY TO NOT BE ABLE TO RECOGNIZE WHEN I’M DEALING WITH INEPT OR INCOHERENT PEOPLE!

Man am I PISSED WITH THAT COMPANIE’S LACK OF CUSTOMER SERVICE!!

Thanks again for your time and help.

alsidfdasdg73

AR-15 Accessories and Parts

Sorry, this is not correct. The AR-15 SPR absolutely does indeed use a rifle length gas system.

As far as us ‘enthusiasts’ know, the military has not adopted the mid system in any form yet.

Certainly not in the SPR.

I’m sure some more experienced folks might have more info on this though…

for an 18" build, the one advantage I give the mid and why I have them, is that I personally think that it balances out the gas system better to have AR-15 accessories inches of barrel in FRONT of the gas port rather than ~4.

we had a thread on this before regarding dissapators and gas systems.

The SPR uses a rifle length gas system. Just look at the post by Milla here, you can clearly see the gas tube extending past the KAC rails.

alsidfdasdg52
-

Sig sauer magazines

I’m not real happy right now. I literally just walked in the door from the range. Out of 102 rounds I fired with my new Sig sauer magazines I had 96 failures to extract.

I was shooting S&B and my carry load. Both had FTEx. The pistol was also dropping the brass from the last round in a magazine and leaving the brass resting on top of the empty mag.

Pistol was cleaned and lubed before heading out. I soaked the extractor in CLP at the range and cleaned it there. That didn’t make any difference in the frequency of FTEx.

This is a real disappointment for me. I really, really like the way the P250 feels and points. The trigger was fine and for the 6 times the pistol actually functioned as a auto-loader follow-up shots seemed to be fast. I was hoping that this was going to be my new carry pistol, but that isn’t going to happen until it’s fixed.

Obviously, I’ll be calling Sig sauer magazine tomorrow and sending it back to them for repair/replacement.

alsidfdasdg43

Taurus magazines

The .500 S&W produced by Taurus magazines are few and far between these days and appear to be discontinued in their product line. I have searched for one for some time and I’m thinking those that have them will hang on to them…but checks here on the E&E and gunbroker.com may find one.

I think you’ll only get into the 8" model in the Taurus magazines .500.

As an aside, I own every 6.5" Tracker model produced (not including any custom guns) by taurus, 6 weapons in all, and they are fine revolvers. Many will discount the maker based on earlier experiences but their manufacturing processes and customer service have improved temendously.

alsidfdasdg47
-

Rifle Scopes

In my opinion, you would have to really NEED *that reticle*
to justify the extra cost for just an OK piece of glass that typically
runs $260.00

Having owned and sold 2 DMS 1’s and a CRS, let me point out a few critical differences aside from just the reticule. Although made by Millet Rifle Scopes and housed in a DMS body, the CRS is an FFP scope so the ranging and BDC Rifle Scopes works at any magnification, the size of the reticule adjusting accordingly.
It has a much bigger eyebox and better eye relief than the DMS 1, again by virtue of it’s FFP design. I got rid of my DMS’s ) because it felt as though if i moved my eye 1/4" in any direction off centerline to the scope it would black out. The result was slower on target times with the DMS than the rifle scope. ( and i do have a very consistant cheekweld, thankyou )
This made it more effective as a red dot-ish scope at 1X on targets more than 10 ft away than the DMS. At 4X the reticule comes into it’s own, the ranging and BD adjustments are incredibly intuitive.

Although they were made by Millet , Ed is a stand up American who’s trying to realise his dream. Read the whole thread referenced above for some insight.

alsidfdasdg56

AK-47

I’ve got an SA M7, and I was looking on the AK-47 site recently, for the replacement stock SCREWS, and I noticed they have a "new style" or maybe it was "improved style", but this "improved" style was stated to ONLY be used with "virgin stocks".
Not to mention that I THINK I remember they were OUT OF STOCK on the original stock screws. What is different about these "improved" screws, and how do they differ from the originals, that I have in my gun?
I am not so sure my local hardware stores have these same sized screws. I mean, they have screws of this nature, but the heads are different sizes/etc, and I would just prefer to buy the true stock screws from an ak-47 supplier. (not sure who else would have them, other than K-VAR????)

alsidfdasdg81
-

Browning Buckmark magazine

Along with additional work to the trigger mechanism, the Browning Buckmark magazine safety is also removed, the trigger face smoothed and polished, and on this particular gun the a trigger travel reduction was preformed in order to effectively minimize the take-up and reset distances that have often plagued Hi-Power shooters. The trigger being our last physical control over the bullet, this is a modification we feel is one of the most valuable as it gets the Hi-Power trigger the closest it has even been to that familiar feel and action of the 1911 trigger system.

After a complete reliability package that addresses the feed ramp, chamber, breech face, extractor, and ejector a new thumb safety is added to the pistol. Out of all the controls on the Browning Buckmark magazines the thumb safety is likely the poorest execution. In stock form it can range from oddly shaped and diminutive all the way to far too small to be used effectively. Our answer is the custom thumb safety developed by Ted Yost and offered only through Heirloom Precision…

alsidfdasdg31